Effect of mono and diglyceride of medium chain fatty acid on the stability of flavour emulsion


Citation

Waghmare J., . and Jadhav H., . and Annapure U., . Effect of mono and diglyceride of medium chain fatty acid on the stability of flavour emulsion. pp. 214-220. ISSN 2550-2166

Abstract

Flavour emulsion is used in a wide range of food products including carbonated beverages dairy products confectionaries and bakery products. Among its food applications are extensive uses in bakery products due to its high heat resistant properties. In flavour emulsion flavour oil is suspended in water phase and this water phase retains flavour even if such flavour emulsion is used for high temperature food application like baking. But flavour extracts are made by suspending flavour oil in alcohol. So such flavour extracts are not suitable for high temperature food processing since alcohol evaporates at high temperature. Thus flavour emulsion is much better than flavour extracts. The stability of flavour emulsion depends on the emulsifier used in making flavour emulsion. Monocaprylin and dicaprylin are mono and diglyceride of mediumchain fatty acids having very good emulsifying properties. The stability of flavour emulsion can be improved by making use of mono and diglyceride as an emulsifier. The present study focused on the development of stable flavour emulsion from fruit waste using mono and diglyceride of medium-chain fatty acid as an emulsifier. The stable flavour emulsion is made from orange oil water and emulsifier using ultra high-pressure homogenizer with 25 MPa pressure. Emulsifier mono and dicaprylin were synthesized by the esterification reaction between glycerol and caprylic acid. The effect of various combination of mono and dicaprylin is studied on the formation of stable flavour emulsion. The higher monocaprylin content in the emulsifier combination showed excellent results and a good synergistic effect on the stability of the emulsion. The combination of mono: diglyceride which resulted in the formation of stable flavour emulsion is 80:20 at 10 concentration 2 passes and 25 mPa pressure in a high-pressure homogenizer. The stability of flavour emulsion was investigated using a storage study. The emulsion was found to be stable for 30 days at ambient temperature (25C) and refrigeration temperature (4C) but showed low stability at 50C.


Download File

Full text available from:

Abstract

Flavour emulsion is used in a wide range of food products including carbonated beverages dairy products confectionaries and bakery products. Among its food applications are extensive uses in bakery products due to its high heat resistant properties. In flavour emulsion flavour oil is suspended in water phase and this water phase retains flavour even if such flavour emulsion is used for high temperature food application like baking. But flavour extracts are made by suspending flavour oil in alcohol. So such flavour extracts are not suitable for high temperature food processing since alcohol evaporates at high temperature. Thus flavour emulsion is much better than flavour extracts. The stability of flavour emulsion depends on the emulsifier used in making flavour emulsion. Monocaprylin and dicaprylin are mono and diglyceride of mediumchain fatty acids having very good emulsifying properties. The stability of flavour emulsion can be improved by making use of mono and diglyceride as an emulsifier. The present study focused on the development of stable flavour emulsion from fruit waste using mono and diglyceride of medium-chain fatty acid as an emulsifier. The stable flavour emulsion is made from orange oil water and emulsifier using ultra high-pressure homogenizer with 25 MPa pressure. Emulsifier mono and dicaprylin were synthesized by the esterification reaction between glycerol and caprylic acid. The effect of various combination of mono and dicaprylin is studied on the formation of stable flavour emulsion. The higher monocaprylin content in the emulsifier combination showed excellent results and a good synergistic effect on the stability of the emulsion. The combination of mono: diglyceride which resulted in the formation of stable flavour emulsion is 80:20 at 10 concentration 2 passes and 25 mPa pressure in a high-pressure homogenizer. The stability of flavour emulsion was investigated using a storage study. The emulsion was found to be stable for 30 days at ambient temperature (25C) and refrigeration temperature (4C) but showed low stability at 50C.

Additional Metadata

[error in script]
Item Type: Article
AGROVOC Term: Emulsifiers
AGROVOC Term: Flavour
AGROVOC Term: Flavouring
AGROVOC Term: Emulsions
AGROVOC Term: Mono and diglycerides
AGROVOC Term: Fatty acids
AGROVOC Term: Glycerol
AGROVOC Term: Caprylic acid
AGROVOC Term: Homogenization
AGROVOC Term: Heat stability
Depositing User: Mr. AFANDI ABDUL MALEK
Last Modified: 24 Apr 2025 00:55
URI: http://webagris.upm.edu.my/id/eprint/10405

Actions (login required)

View Item View Item