Citation
K.K Jain, . and A.K. Shrivastava, . and C.R. Mehta, . (2007) Laboratory study and analysis of selected tractor seats for seating dimensions. [Proceedings Paper]
Abstract
Tractor seat is one of the important component/assembly as far as the human machine system and comfort of tractor operator is concerned. With this view a field survey and laboratory study was conducted of selected popular tractors and tractor seats respectively with particular reference to seating dimensions. Dimensions for seat pan and backrest were measured and analyzed according to BIS recommendations. The results highlighted that seat pan width was found 10.9 less seat height was found 15.3 in excess no vertical adjustments and backrest width was also found 20.4 less. This mat caused discomfort for smaller as well as higher percentile tractor operators. Based upon the design of mounting arrangement of differetn tractor seats - a common device i.e. seat base plate was developed. This plate may serve as a base providing isolators for vibration attenuation. Also this arrangement may be quite useful in testing of different tractor seats under the constraints in availability of different makes of tractors at a time for experimental study or testing work. The study also highlighted that present tractor seats needs minor modifications/improvements in seating dimensions as per BIS recommendations. The development of a common seat base plate may prove to be a step forward in the direction of long awaited tractor standardization. The information thus obtained can be utilized in seat design work place lay out as well as adapted by agriculture engineers for better work improvement.
Download File
Full text available from:
|
Abstract
Tractor seat is one of the important component/assembly as far as the human machine system and comfort of tractor operator is concerned. With this view a field survey and laboratory study was conducted of selected popular tractors and tractor seats respectively with particular reference to seating dimensions. Dimensions for seat pan and backrest were measured and analyzed according to BIS recommendations. The results highlighted that seat pan width was found 10.9 less seat height was found 15.3 in excess no vertical adjustments and backrest width was also found 20.4 less. This mat caused discomfort for smaller as well as higher percentile tractor operators. Based upon the design of mounting arrangement of differetn tractor seats - a common device i.e. seat base plate was developed. This plate may serve as a base providing isolators for vibration attenuation. Also this arrangement may be quite useful in testing of different tractor seats under the constraints in availability of different makes of tractors at a time for experimental study or testing work. The study also highlighted that present tractor seats needs minor modifications/improvements in seating dimensions as per BIS recommendations. The development of a common seat base plate may prove to be a step forward in the direction of long awaited tractor standardization. The information thus obtained can be utilized in seat design work place lay out as well as adapted by agriculture engineers for better work improvement.
Additional Metadata
Item Type: | Proceedings Paper |
---|---|
Additional Information: | Perpustakaan Sultan Abdul Samad Universiti Putra Malaysia 43400 UPM Serdang Selangor Malaysia. S671.3 A278 2007 |
AGROVOC Term: | TRACTORS |
AGROVOC Term: | SEATS |
AGROVOC Term: | DIMENSIONS |
AGROVOC Term: | WORKING CONDITIONS |
AGROVOC Term: | TECHNICAL PROPERTIES |
Geographical Term: | MALAYSIA |
Depositing User: | Ms. Suzila Mohamad Kasim |
Last Modified: | 24 Apr 2025 05:13 |
URI: | http://webagris.upm.edu.my/id/eprint/11119 |
Actions (login required)
![]() |
View Item |